Adjustable Sheet Metal Circle Hole Cutter

                        New Green Color for the sheet Metal Hole Cutter

                                          

This Circle Hole drill Cutter hand tool from DMSeeleys Tools cuts holes in up to 20 Gauge sheet metal. It can be used with any high speed electric drill. The drill bit wears only in the amount of thickness of the material cut. Adjusting the hand tool bit up or down slightly will expose a new cutting edge and thus increase the life of the bit used.  YOU MAY ALSO USE A SHEET METAL DRILL BIT. Instructions included with this handy hand tool. Bits loike the one that comes with this  hand tool are also available at DMSeeleysTools.com
There is a scale on the bottom of this Adjustable Circle Hole Cutter  in inches and Metric for hole size. The Circle Hole cutter pivots on a pre-drilled center hole on the pivot pin with adjustable nut. DMSeeleys Tools for your home hand tools needs.

                                          

 
      

DMSeeleys tools for the best in hand tools.

From DMSeeleysTools.com The Adjustable Metal Circle 

                                        Hole Cutter

Directions on how to use the Adjustable Sheet Metal Hole Cutter and more information and pictures of hand tools below.


                               

                                             

 

    STAINLESS STEEL TRI SQUARE



  A Combination Square is a hand tool used for multiple purposes in and It is composed of a blade rule and one or more interchangeable heads that may be affixed to it. The most common head on these hand tools is the standard or square head which is used to lay out or check right and 45° angles. Check out the large 24" Combination Square at DMSeeleys Hand Tools.



  A right angle is the standard by which all carpenters build. When corners meet at 90 degrees, drawers fit snugly, windows close tight, and walls stand straight. The key to all this is a square. Most provide a fixed 90-degree angle in various forms, and some can help copy or draw other angles.

  From DMSeeleysTools.com This Combination stainless steel Tri Square hand tool is in 1/16" and 1/8" graduations the square has a spirt level with scribe threaded in the unit. This deluxe hand tool Tri Square has brass thumb knurled screws and is made of cast metal stock and stainless steel. No plastic. Center head 18 degree protractor and precision milled faces. This Combination Square can be seen at www.DMSeeleysTools.com.

  The Combination Tri Square hand tool is not so exact as to be a hundred percent accurate most of the time, but a good Tri Square is very close. They usually come with a metal scribe inserted into the square head across from the ruler. The better Combination Tri Squares also have at least a center head, while others also are equipped with a protractor head for measuring angles. The one in the picture is from DMSeeleysTools.com. 


  The Combination Square was invented by Larry S. Starrett in 1878. One of the More expensive Tri Squares on the market still carries his name. There are many uses for the combination Tri Square Hand Tools in the woodshop and also by metal workers in a variety of layout and setup tasks as a needed Hand Tool.

Other Uses


  Your combination square is one of your most useful tools and can also be used to check angles, to determine the center point of a round object, and to measure different angles for precision cutting.

Once you know how to use a Combination Tri Square, you will wonder how you ever got by without it.


  So for the most part a combination square is a layout tool that wise construction professionals keep handy in their toolbox. The versatility of a combination square comes from the interchangeable heads you attach to the combination square blade. An important square head, the centering head, allows you to find the center of circles and squares. A centering head resembles a "V," with a locking thumb nut located near the point of the "V." The square blade rests in the center head, with one side of the square blade sitting on the center of the head.

The Combination Tri Square Hand Tools are good for laying out lines for ripping, crosscutting, mitering, and making notches. The head, with fences at 90 and 45 degrees, slides along the blade and locks, allowing you to transfer a distance accurately and hold it while you draw a line with a pencil. Cabinetmakers like the fixed Hand tool square for checking corners and edges, but for most carpentry and metal work tasks, a Combination Tri Square Hamd Tool is more versatile and available at DMSeeleysTools.com. For your at home hand tool needs.

HACK SAW & MITER BOX Hand Tool

                         MITER BOX HACK SAW




 This Miter box Hack Saw hand tool form DMSeeleysTools.com has Improved Quality, the Miter Box Hack Saw now has a steel back bone and a comfort grip rubber handle instead of a impact plastic handle like many of the other Miter box Hack saws and includes a metal adjustment knob. Also Includes 3-- 6" Blades plus the sturdy aluminum alloy saw frame as seen.

This quality mini Miter Box Hack Saw works well with precision cuts for framing or any hobby cutting that needs to be exact. It will cut wood, plastic and metal. The hand tool saw measures about 10 3/4" inches in total length and has a comfortable Rubber handle with a sturdy hand tool metal frame.

The hand tool saw has an easy metal turning knob for removing and inserting blades and comes with a total of 3 blades. This saw will cut to a depth of 2 1/4". The neat Mini Aluminum alloy Miter box cuts miters at 45 degrees and 90 degrees with 1 1/2 cutting capacity. The extended front lip on the Miter Box hand tool butts up against any work table to reduce slipping and holds the box in place. Clamp it or drill holes in it for a more permanent mount.

The 6" carbon steel blades and Miter Box is great for cutting smaller objects. The carbon steel blades easily cuts the most commonly used angles: 45°, and 90°. Its compact size makes it perfectly made for compact spaces and the blade can be relied on for easily cutting wood, plastic or metal. Includes (3) Blades Hacksaw and (1) metal miter box. This quality Saw can be seen at DMSeeleysTools.com.

Denny

See it at DMSeeleysTools.com for your at home hand tool needs.

HAND TOOL NUT RIVETER

                        HAND NUT RIVETER 5 SIZES

                                                       Available from DMSeeleysTools USA

                                                          

From DMSeeleysTools The Riv Nut hand Tools have five different size nose pieces when other Riv Nut hand tools only have 4 and requires access to only one side of the work piece. The Riv Nut can be installed after painting or other final finishing operations. Its ideal for materials that can't be tapped or welded.



At least six full thread turns, even in thin materials.







Only one operator is required from one side to use the Riv Nut hand tools.







May be used as blind fastener or screw anchor.







Suitable for small production



applications or mass production assembly lines.







APPLICATIONS-- You can use the Riv Nut hand tools for automobiles, electric home appliances, electronics, building and construction. works like a rivet but has a threaded center. It's like putting a nut on the other side when only one side of the material is accessible. This also works well for stripped holes as an insert.







Contains:  Heavy Duty Riv Nut Hand Tool setting tools and 5 different threaded nose pieces to match the following Riv Nut sizes 6-32, 8-32, 10-24, 1/4-20 and 10/32s inserts. Also comes with directions and hole drill size chart.





Description:



Applies threaded inserts into thin metal, plastic or fiberglass. Insert tools comes with 5 threaded mandrels and nosepieces to set the following thread sizes:6-32, 8-32, 10-24, 10-32, 1/4-20. Drill hole into material. Screw on threaded insert on tool. Squeeze handle until insert is set. Turn knob counterclockwise until released. Inserts sold separately.

Quick Thread Size Hole Size

6-32 17/64” (.2656) (6.747mm)

8-32 17/64” (.2656) (6.747mm)

10-24 19/64” (.2969) (7.541mm)

10-32 19/64” (.2969) (7.541mm)

1/4-20 25/64” (.3906) (9.9922mm)



Quantity:





INSTRUCTIONS



1.Select the Quick Thread Rivet size that you wish to use: 6-32, 8-32, 10-24, 10-32 or 1/4-20. With the hand tools handle open, screw on corresponding color threaded mandrel (turn counterclockwise) and tighten with tool





--------------------------------------------------------------------------------



2.With your tools handle open, screw corresponding color nosepiece onto tool and tighten (turn counterclockwise).





--------------------------------------------------------------------------------



3. With your hand tools handle open, screw threaded rivet onto threaded mandrel and tighten until threaded rivet head makes contact with nosepiece.

4. Drill recommended hole size (See chart below).





--------------------------------------------------------------------------------



5. Insert threaded rivet into hole.

6. Squeeze your hand tools handle to set threaded rivet. Rivet is set when expanded and snug in hole. Caution: Threads will become damaged if set with too much force.

7. Using tool knob, unscrew tool from threaded rivet.





--------------------------------------------------------------------------------



8. Threaded rivet is now ready to accept screw (sold separately).





--------------------------------------------------------------------------------























ALSO Available! Heavy Duty Stainless steel Riv Nuts @ DMSeeleysTools. com


DMSeeleys Hand Tools for your at home had tools.

TOWELS FALL OFF HOOK TIP

From DMSeeleysTools.com.  This is our make your life easier  tip. Ever get one of those expensive towel hooks. You know the one that matches your toilet paper holder and your towel bar etc. The problem is since it is so fancy it doesn't do what it was supposed to do. I mean like hold your towel. Put your towel on it then reach down to pick it up off the floor since that's where it fell.

Walk by your hanging towel, --oops it just fell off  on to the floor again. Well here's a simple way to put an end to this aggravation once and for all and in the best way,-- cheap! Pick up some small Velcro pads or what ever size you need. Clean the hook with alcohol then put a small cut of the picky side behind your hook where it comes in contact with the towel and where ever you can't see it. Small is better then too big other wise it might come off. That will put and end to that aggravation and yes your welcome!

Denny

REMOVE RUSTED & STUBBORN
SCREWS & NUTS

The Impact Driver for the job. If you ever had a rusted screw or bolt to deal with you will really like this Hand Tool. Save on your injured hands with this powerful Hand Tool Heavy duty knurled, chrome plated Hand tool handle with Metal Case and 4 piece chrome vanadium steel bits: Flat- 5 /16", 3/8". Phillips- #2, #3.

Whether its a boat motor with rusted screws or any rusted bolts or screws this Hand Tool Impact Driver will loosen them without destroying them. Just insert the Impact Driver bit into the screw and hit the end of then Hand Tool with a hammer, your work has just been done. Use with 3/8" drive sockets to loosen frozen bolts or nuts with this Hand tool mpact Driver.

The Impact Driver Hand Tool is also reversible so you can also use it to tighten bolts nuts or screws. You can see this at DMSeeleysTools.com.