Nut Riveter Hand Tool

HAND NUT RIVETER 5 SIZES

Check out DMSeeleysTools.com other Riveters and Riv Nut hand Tools  
 From DMSeeleysTools.com. This Riv Nut hand Tool  has five different size nose pieces when other Riv Nut hand tools only have 4 and requires access to only one side of the workpiece. The Riv Nut can be installed after painting or other final finishing operations. Its ideal for materials that can't be tapped or welded.

             At least six full thread turns, even in thin materials.

        Only one operator is required from one side to use this Riv Nut hand tool.

        May be used as blind fastener or screw anchor.

                      Suitable for small production
             applications or mass production assembly lines.

APPLICATIONS-- You can use the Riv Nut hand tool for automobiles, electric home appliances, electronics, building and construction. works like a rivet but has a threaded center. It's like putting a nut on the other side when only one side of the material is accessible. This also works well for stripped holes as an insert.
             
Contains: Heavy duty Riv Nut Hand Tool setting tool and 5 different threaded  nose pieces to match the following Riv Nut sizes  6-32, 8-32, 10-24, 1/4-20 and 10/32s inserts. Also comes with directions and hole drill size chart.
The Riv Nut Tools measures 10 1/2" in length and 2" in width with the handles closed and about 5 inches across from the insert tip to the end of the thumb wheel. 

Description: Applies threaded inserts into thin metal, plastic or fiberglass. Insert tool comes with 5 threaded mandrels and nosepieces to set the following thread sizes:6-32, 8-32, 10-24, 10-32, 1/4-20. Drill hole into material. Screw on threaded insert on tool. Squeeze handle until insert is set. Turn knob counterclockwise until released. Inserts sold separately. Quick Thread Size Hole Size 6-32 17/64” (.2656) (6.747mm) 8-32 17/64” (.2656) (6.747mm) 10-24 19/64” (.2969) (7.541mm) 10-32 19/64” (.2969) (7.541mm) 1/4-20 25/64” (.3906) (9.9922mm)                                DMSeeleysTools.com INSTRUCTIONS 1.Select the Quick Thread Rivet size that you wish to use: 6-32, 8-32, 10-24, 10-32 or 1/4-20. With tool handle open, screw on corresponding color threaded mandrel (turn counterclockwise) and tighten with tool 2.With tool handle open, screw corresponding color nosepiece onto tool and tighten (turn counterclockwise). 3. With tool handle open, screw threaded rivet onto threaded mandrel and tighten until threaded rivet head makes contact with nosepiece. 4. Drill recommended hole size (See chart below). 5. Insert threaded rivet into hole. 6. Squeeze tool handle to set threaded rivet. Rivet is set when expanded and snug in hole. Caution: Threads will become damaged if set with too much force. 7. Using tool knob, unscrew tool from threaded rivet. 8. Threaded rivet is now ready to accept screw (sold separately).

   ALSO Available!  Heavy Duty Stainless steel Riv Nuts @ DMSeeleysTools.com 
                                  

                                        Economy!

                                         Strength!

                                         Simplicity!

                                       Make it yours!





Denny
 
DMSeeleysTools.com for your at home hand tool needs.Nut Riveter Hand Tool