Tuesday, July 17, 2012

HAND TOOL NUT RIVETER

                        HAND NUT RIVETER 5 SIZES

                                                       Available from DMSeeleysTools USA

                                                          






From DMSeeleysTools The Riv Nut hand Tools have five different size nose pieces when other Riv Nut hand tools only have 4 and requires access to only one side of the work piece. The Riv Nut can be installed after painting or other final finishing operations. Its ideal for materials that can't be tapped or welded.



At least six full thread turns, even in thin materials.







Only one operator is required from one side to use the Riv Nut hand tools.







May be used as blind fastener or screw anchor.







Suitable for small production



applications or mass production assembly lines.







APPLICATIONS-- You can use the Riv Nut hand tools for automobiles, electric home appliances, electronics, building and construction. works like a rivet but has a threaded center. It's like putting a nut on the other side when only one side of the material is accessible. This also works well for stripped holes as an insert.







Contains:  Heavy Duty Riv Nut Hand Tool setting tools and 5 different threaded nose pieces to match the following Riv Nut sizes 6-32, 8-32, 10-24, 1/4-20 and 10/32s inserts. Also comes with directions and hole drill size chart.





Description:



Applies threaded inserts into thin metal, plastic or fiberglass. Insert tools comes with 5 threaded mandrels and nosepieces to set the following thread sizes:6-32, 8-32, 10-24, 10-32, 1/4-20. Drill hole into material. Screw on threaded insert on tool. Squeeze handle until insert is set. Turn knob counterclockwise until released. Inserts sold separately.

Quick Thread Size Hole Size

6-32 17/64” (.2656) (6.747mm)

8-32 17/64” (.2656) (6.747mm)

10-24 19/64” (.2969) (7.541mm)

10-32 19/64” (.2969) (7.541mm)

1/4-20 25/64” (.3906) (9.9922mm)



Quantity:





INSTRUCTIONS



1.Select the Quick Thread Rivet size that you wish to use: 6-32, 8-32, 10-24, 10-32 or 1/4-20. With the hand tools handle open, screw on corresponding color threaded mandrel (turn counterclockwise) and tighten with tool





--------------------------------------------------------------------------------



2.With your tools handle open, screw corresponding color nosepiece onto tool and tighten (turn counterclockwise).





--------------------------------------------------------------------------------



3. With your hand tools handle open, screw threaded rivet onto threaded mandrel and tighten until threaded rivet head makes contact with nosepiece.

4. Drill recommended hole size (See chart below).





--------------------------------------------------------------------------------



5. Insert threaded rivet into hole.

6. Squeeze your hand tools handle to set threaded rivet. Rivet is set when expanded and snug in hole. Caution: Threads will become damaged if set with too much force.

7. Using tool knob, unscrew tool from threaded rivet.





--------------------------------------------------------------------------------



8. Threaded rivet is now ready to accept screw (sold separately).





--------------------------------------------------------------------------------























ALSO Available! Heavy Duty Stainless steel Riv Nuts @ DMSeeleysTools. com


DMSeeleys Hand Tools for your at home had tools.









No comments: